How To Burn A Spotmau PowerSuite CD From Its .ISO File


How to burn?


Please do NOT try to click/open/unzip/extract/install the .ISO file. You need to have a CD writer/burner and use the burncdcc.exe here to burn a CD from the .ISO file.

Using your own burning software is NOT recommended, since most of them are designed for multi-tasks and so they are not easy to use for this special purpose.


How to know if I have burned the CD successfully?


On a working PC already running Windows, go to "My Computer", and then browse the contents of this CD. If you have burned the CD successfully, you will see several files in the CD instead of a single .ISO file.


What to do if I cannot burn the CD successfully?


Please visit our support site for help at www.SpotmauSupport.com. Normally we will answer your question within 1~2 hours. During busy periods this may take longer but it is not expected to exceed 12 hours.

Or, if you have not added the "Get it On CD" option, you can pay additional shipping and handling fee to receive a physical CD by clicking here.


Step-By-Step Instructions for Burning a Bootable CD:


(Note: Please pay more attention to the Step 3.)

Step 1: Double click on the burncdcc.exe to run the BurnCDCC software.


Step 2:

  • On the BurnCDCC software, please click the Browse button to find and select the .ISO file you have downloaded.
  • Check the "Finalize" and the "Read Verify" box.
  • Selecting lower speed such as 4X or 8X is recommended.
  • Click on Start button to start burning your CD.
  • Insert a blank CD into your CD writer.


Step 3: Sometimes BurnCDCC will push your blank CD out from your CD writer and display a message as "Please insert a blank disc into the drive". If this is the case, just push your blank CD back into your CD writer and press the "OK" button.


Step 4: After BurnCDCC starts burning the CD, the "Start" button becomes disabled.


Step 5: After BurnCDCC finishes the burning, the "Start" button will become enabled again and your CD writer will pop your CD out. Your CD is ready to use now! Press "Close" button to exit the BurnCDCC.